You are using an old version of this browser, for best results please update.
In order to provide you with the best online experience this website uses cookies. By using our website, you agree to our use of cookies. More Info.
GT Position V1 - GPS for your layout Gamesontrack® 1300923

GT Position V1 - GPS for your layout Gamesontrack® 1300923

Product Code: 102969
There are currently no reviews listed for this item. If you you would like to submit a review for this item please click 'Write A Review' below and complete the online form.
Out Of Stock
Awaiting
delivery date
£319.20
(£266.00 excl. VAT)
Gamesontrack® GT-Position
A complete block occupancy monitoring system in a box!


For some of the possibilities, take a look at this 4 minute video:


How to get started with GT-Position
The start-up package contains one PC interface/receiver, 2 positioning receivers, one sender (one loco) plus all SW and installation guides.
GT-Position can be used almost immediately, without requiring any modifications to most model railway layouts. The positioning receivers are fitted above the layout, and the senders into the loco, or a carriage/wagon.

A few of the advantages are:
A better operating experience, better/easier automatic operation, less wiring, savings on feed-back modules, no more physical track isolation, etc.

As soon as you have installed the GT-position receivers and inserted the first sender into a train you can start drawing your layout and automating operations. If you wish to add a 3rd receiver it will enable 3D drawing and positioning for those with multi-level layouts.

If you already have feed-back modules on your layout, GT-Position can work together with them using GT-Command (purchased separately) and you can use GT-position to fine tune the automation on top of what you already have, or you can extend your layout based on GT-position only.

GT-Position is independent of your control system. You only need the integration with your control system and GT-Command if you want to control and/or automate.
If you just want tracking, monitoring and layout drawing, then you can use GT-Position alone. The only requirement is that you can supply the trains /wagons with power. You can drive using a lokmouse or any handheld control device.

Advantages of GT-Position
- Very precise layout drawings with true geometry, your train measures your layout and draws it as it moves.
- With a GPS system you know at all times the position, and later the whole length of your train, displayed on your screen.
- Automation can be set up for each individual train using GT-Command (purchase separately). It is 'location aware' model train control.
- No need to cut tracks and isolate rails in order to get feed-back for position and block occuancy.
- Reduce wires and time spent under the layout wiring and fault finding.
- Adding a new block requires only 4 mouse clicks, or remove the old one with one click.
- Later, when you expand the layout you can easily expand the track plan with all your track positions. You just need to open the file and start driving again.

Challenges:
- Like any new addition, it is a new investment, but also offset by equivalent saving against other modules.
- As you are used to with DCC, you either need to buy a loco which already has the sender inserted, modify the loco yourself, use a wagon after the train, or use battery operation for the sender.
There are currently no reviews listed for this item. If you you would like to submit a review for this item please click 'Write A Review' below and complete the online form. Write A Review
GT Position V1 - GPS for your layout Gamesontrack® 1300923
Product Code:102969
GT Position V1 - GPS for your layout Gamesontrack® 1300923
Gamesontrack® GT-Position
A complete block occupancy monitoring system in a box!


For some of the possibilities, take a look at this 4 minute video:


How to get started with GT-Position
The start-up package contains one PC interface/receiver, 2 positioning receivers, one sender (one loco) plus all SW and installation guides.
GT-Position can be used almost immediately, without requiring any modifications to most model railway layouts. The positioning receivers are fitted above the layout, and the senders into the loco, or a carriage/wagon.

A few of the advantages are:
A better operating experience, better/easier automatic operation, less wiring, savings on feed-back modules, no more physical track isolation, etc.

As soon as you have installed the GT-position receivers and inserted the first sender into a train you can start drawing your layout and automating operations. If you wish to add a 3rd receiver it will enable 3D drawing and positioning for those with multi-level layouts.

If you already have feed-back modules on your layout, GT-Position can work together with them using GT-Command (purchased separately) and you can use GT-position to fine tune the automation on top of what you already have, or you can extend your layout based on GT-position only.

GT-Position is independent of your control system. You only need the integration with your control system and GT-Command if you want to control and/or automate.
If you just want tracking, monitoring and layout drawing, then you can use GT-Position alone. The only requirement is that you can supply the trains /wagons with power. You can drive using a lokmouse or any handheld control device.

Advantages of GT-Position
- Very precise layout drawings with true geometry, your train measures your layout and draws it as it moves.
- With a GPS system you know at all times the position, and later the whole length of your train, displayed on your screen.
- Automation can be set up for each individual train using GT-Command (purchase separately). It is 'location aware' model train control.
- No need to cut tracks and isolate rails in order to get feed-back for position and block occuancy.
- Reduce wires and time spent under the layout wiring and fault finding.
- Adding a new block requires only 4 mouse clicks, or remove the old one with one click.
- Later, when you expand the layout you can easily expand the track plan with all your track positions. You just need to open the file and start driving again.

Challenges:
- Like any new addition, it is a new investment, but also offset by equivalent saving against other modules.
- As you are used to with DCC, you either need to buy a loco which already has the sender inserted, modify the loco yourself, use a wagon after the train, or use battery operation for the sender.
£
(£ excluding VAT)