You are using an old version of this browser, for best results please update.
In order to provide you with the best online experience this website uses cookies. By using our website, you agree to our use of cookies. More Info.
Digitrax DCS51 Zephyr Xtra

Digitrax DCS51 Zephyr Xtra

Product Code: 103207
There are currently no reviews listed for this item. If you you would like to submit a review for this item please click 'Write A Review' below and complete the online form.
Out Of Stock
Awaiting
delivery date
£174.81
(£145.68 excl. VAT)
Zephyr Xtra control desk
The upgraded version of the classic Digitrax Zephyr DCC controller


29 function DCC controller, including a UK 3 pin Power supply (CE/UK/European approved)

* Everything you need to get started in Digitrax Command Control for a great low price, now includes power supply.
* Zephyr is perfect for beginning, intermediate and advanced model railroaders. It is easy to use and has tons of features.
* Zephyr offers excellent speed control, prototypical consisting, the full range of programming features and much more.
* Zephyr is a breath of fresh air in model railroading.

Zephyr Xtra’s DCS51 is approximately 7.25" wide, 5.5" deep (including rear connector), 2.75" high (including knobs).

All connectors are at the rear of the unit so, leave plenty of room for wires.

Note: There are a wide variety of DCC decoders available today and some are made to fit specific locomotives. Some decoders have more features and cost more money and some are less expensive with fewer features. DCC Supplies will be able to assist you in choosing the “right” decoder for your layout. click here for decoder listings

Zephyr Xtra Offers:
* Simple to use controls for running trains.
* Large speed control knob and direction switch with brake.
* Full numeric key pad.
* Easy 2 and 4 digit addressing.
* Smooth speed control.

Run multiple trains at once without blocking!
* Run up to 20 addresses at the same time on your system.
* Run up to 20 throttles at the same time on your system.

Jump Ports for using DC power packs as additional throttles
* Use one or two smooth DC power packs as throttles to control DCC equipped locomotives.
* Simple, cost effective way to add more throttles to your Zephyr set.
* Makes it easy to share the fun of DCC with layout visitors and young operators.
* Functions on locos controlled by Jump throttles remain active.

Over 9000 Locomotive Addresses
* Use Address 00 to run one or more locos without DCC decoders
* Two Digit Addressing is easy to use. (Address 01-127)
* Four Digit Addressing-use the number painted on your engines as its address.

3 Amps of Power to run multiple trains.

* Booster outputs 13V for safe operation in N and HO scales.

Function Control

* Control 29 functions - F0 through F28.
* Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
Stationary Decoders, Turnout Control & Turnout Position Reporting
* Access to stationary decoder control for turnouts and other devices.
* Control 999 stationary decoder addresses.

Consisting
* Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analogue locos.
* Advanced consisting, allows only advanced consist capable mobile decoders.
* Basic consisting, program decoders to run on same address.

Decoder Programming
* Built in read/write programmer that can read and write all CVs.
* Supports Paged programming (Digitrax preferred method). Also supports direct & register mode programming.
* Operations mode programming can be used to program decoders on the layout.

Expandability with Digitrax LocoNet
* Use Zephyr Xtra as a starting point for your Dig
There are currently no reviews listed for this item. If you you would like to submit a review for this item please click 'Write A Review' below and complete the online form. Write A Review
Digitrax DCS51 Zephyr Xtra
Product Code:103207
Digitrax DCS51 Zephyr Xtra
Zephyr Xtra control desk
The upgraded version of the classic Digitrax Zephyr DCC controller


29 function DCC controller, including a UK 3 pin Power supply (CE/UK/European approved)

* Everything you need to get started in Digitrax Command Control for a great low price, now includes power supply.
* Zephyr is perfect for beginning, intermediate and advanced model railroaders. It is easy to use and has tons of features.
* Zephyr offers excellent speed control, prototypical consisting, the full range of programming features and much more.
* Zephyr is a breath of fresh air in model railroading.

Zephyr Xtra’s DCS51 is approximately 7.25" wide, 5.5" deep (including rear connector), 2.75" high (including knobs).

All connectors are at the rear of the unit so, leave plenty of room for wires.

Note: There are a wide variety of DCC decoders available today and some are made to fit specific locomotives. Some decoders have more features and cost more money and some are less expensive with fewer features. DCC Supplies will be able to assist you in choosing the “right” decoder for your layout. click here for decoder listings

Zephyr Xtra Offers:
* Simple to use controls for running trains.
* Large speed control knob and direction switch with brake.
* Full numeric key pad.
* Easy 2 and 4 digit addressing.
* Smooth speed control.

Run multiple trains at once without blocking!
* Run up to 20 addresses at the same time on your system.
* Run up to 20 throttles at the same time on your system.

Jump Ports for using DC power packs as additional throttles
* Use one or two smooth DC power packs as throttles to control DCC equipped locomotives.
* Simple, cost effective way to add more throttles to your Zephyr set.
* Makes it easy to share the fun of DCC with layout visitors and young operators.
* Functions on locos controlled by Jump throttles remain active.

Over 9000 Locomotive Addresses
* Use Address 00 to run one or more locos without DCC decoders
* Two Digit Addressing is easy to use. (Address 01-127)
* Four Digit Addressing-use the number painted on your engines as its address.

3 Amps of Power to run multiple trains.

* Booster outputs 13V for safe operation in N and HO scales.

Function Control

* Control 29 functions - F0 through F28.
* Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
Stationary Decoders, Turnout Control & Turnout Position Reporting
* Access to stationary decoder control for turnouts and other devices.
* Control 999 stationary decoder addresses.

Consisting
* Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analogue locos.
* Advanced consisting, allows only advanced consist capable mobile decoders.
* Basic consisting, program decoders to run on same address.

Decoder Programming
* Built in read/write programmer that can read and write all CVs.
* Supports Paged programming (Digitrax preferred method). Also supports direct & register mode programming.
* Operations mode programming can be used to program decoders on the layout.

Expandability with Digitrax LocoNet
* Use Zephyr Xtra as a starting point for your Dig
£
(£ excluding VAT)