You are using an old version of this browser, for best results please update.
In order to provide you with the best online experience this website uses cookies. By using our website, you agree to our use of cookies. More Info.
Sale
ABBOTT 8-Plank Mineral Wagons O Gauge Lionheart 323

ABBOTT 8-Plank Mineral Wagons O Gauge Lionheart 323

Product Code: 110101
Was £42.75 now £35.00 saving £7.75
There are currently no reviews listed for this item. If you you would like to submit a review for this item please click 'Write A Review' below and complete the online form.
3
In Stock
Available for next day delivery, order by 2pm
£35.00
(£29.17 excl. VAT)
1930/40's Bauxite body RCH 8-plank Mineral Wagons
7mm O Gauge ready to run model


History
In 1907 the Railway Clearing House (RCH) prepared a set of regulations for the construction of 8,10 & 12 ton wagons, however after about 1910 the 12 ton wagons became more popular and by 1923 a new RCH specification was released which included oil axleboxes, brake shoe that could be fitted universally and coil sprung buffers to name a few.

The 1923 RCH standard was used not only for private owner wagon construction, but also by the L.M.S. and L.N.E.R. In fact the L.M.S. constructed more that 30,000 wagons to the standard 7-plank design many wagons lasting well into the 1960’s.

For further historical information please see the excellent series of books called ‘PRIVATE OWNER WAGONS’ By Keith Turton and Ian Pope, published by Lightmoor Press

The Model
The Lionheart model represents the RCH 1923 7-plank body design with side and end doors or side doors only, depending on the decoration requirements. The door on one side is a separate part and can be repositioned in the open position to simulate being unloaded in the yard.

All our models are built to a ratio of 1:43.5, 7mm scale and fitted with finescale wheels for '0' gauge track. ScaleSeven wheels are also available.

The body is made of ABS plastic incorporating fine detailing and fully finished in 1930's, 1940's and 1950's decorations; the last two digits of the product number indicate the period.

The chassis contains a die-cast metal floor to add weight, a compensating beam on one side to improve running performance, brass bearings, die-cast wheels with steel tyres, sprung metal buffers, sprung die-cast hook and metal coupling links.

Solebars, axleboxes and brake gear components are moulded in ABS plastic for strength.
There are currently no reviews listed for this item. If you you would like to submit a review for this item please click 'Write A Review' below and complete the online form. Write A Review
ABBOTT 8-Plank Mineral Wagons O Gauge Lionheart 323
Product Code:110101
ABBOTT 8-Plank Mineral Wagons O Gauge Lionheart 323
1930/40's Bauxite body RCH 8-plank Mineral Wagons
7mm O Gauge ready to run model


History
In 1907 the Railway Clearing House (RCH) prepared a set of regulations for the construction of 8,10 & 12 ton wagons, however after about 1910 the 12 ton wagons became more popular and by 1923 a new RCH specification was released which included oil axleboxes, brake shoe that could be fitted universally and coil sprung buffers to name a few.

The 1923 RCH standard was used not only for private owner wagon construction, but also by the L.M.S. and L.N.E.R. In fact the L.M.S. constructed more that 30,000 wagons to the standard 7-plank design many wagons lasting well into the 1960’s.

For further historical information please see the excellent series of books called ‘PRIVATE OWNER WAGONS’ By Keith Turton and Ian Pope, published by Lightmoor Press

The Model
The Lionheart model represents the RCH 1923 7-plank body design with side and end doors or side doors only, depending on the decoration requirements. The door on one side is a separate part and can be repositioned in the open position to simulate being unloaded in the yard.

All our models are built to a ratio of 1:43.5, 7mm scale and fitted with finescale wheels for '0' gauge track. ScaleSeven wheels are also available.

The body is made of ABS plastic incorporating fine detailing and fully finished in 1930's, 1940's and 1950's decorations; the last two digits of the product number indicate the period.

The chassis contains a die-cast metal floor to add weight, a compensating beam on one side to improve running performance, brass bearings, die-cast wheels with steel tyres, sprung metal buffers, sprung die-cast hook and metal coupling links.

Solebars, axleboxes and brake gear components are moulded in ABS plastic for strength.
£
(£ excluding VAT)