ECOSDetector Standard (50096)

The ECoSDetector Standard is made for all model railroaders who look for a reliable and affordable feeback module without needing the expandable functions of the ECoSDetector. The ECoSDetector Standard is primarily meant to be a substitute for the aged s88 feedback modules: modifications on track work wiring are not necessary.

Detection and feedback

The ECoSDetector is able to monitor up to 16 track sections and reports the presence of a loco (track occupancy). Operation with every 3-digit track is possible, no matter if you have a M-, K-, or C-track.

Switch inputs

The ECoSDetector Standard has 16 feedback inputs that work as „common“contacts. An ECoSDetector Standard has to be wired exactly in the same manner as an s88 module and thus replace it. Due to the robust ECoSlink feedback bus the feedback is far more reliable.

The ECoSDetector Standard is mainly designed for 3-rail layouts or for layouts with reed contacts..

ECoSlink connection

Every ECoSDetector Standart can be directly connected to the command station via the ECoSlink bus. Beside all ECoS command stations you can also use the Central Station® (updated with the Central Station® with software upgrade by ESU). The module will be automatically linked to the command station and also graphically configured.

Upgradeable

When needed, the ECoSDetector software can be upgraded to add new functionalities. The command station will perform the required updates completely automatically. This will guarantee at all times that the ECoSDetector remains at the most current technical status.