(828057) Soundtraxx Tsunami TSU-GN1000 GE FDL-16 Modern Diesel - Soundtraxx

Product 88 of 98 from manufacturer Soundtraxx

(828057) Soundtraxx Tsunami TSU-GN1000 GE FDL-16 Modern Diesel
[828057]

£77.50p
(£64.58p excl. VAT)

Scroll down the page for additional related products

(828057) Soundtraxx Tsunami TSU-GN1000 GE FDL-16 Modern Diesel

Click to enlarge

Tsunami GE FDL-16 Modern

Plug and Play Digital Sound Decoder for Athearn Genesis HO Diesels
The TSU-GN1000 Digital Sound Decoder is here and ready to provide you with the best Digital Sound for your coveted Athearn Genesis HO diesel models.
Measures (l x w x h) 73mm x 17.5 x 9 (2"7/8th" x 11/16th" x 3/8th")

- for modern General Electric prototypes manufactured with the GE FDL-16 Prime Mover

This includes such engines as:
B36-8, B39-8, B40-8WH
Dash-8-32BWH, Dash 8-40B, Dash 8-40BW
Dash 8-40BWH (Amtrak only)
C39-8, Dash 8-40C, Dash 8-40CM, Dash 8-40CW
Dash 8041CW, Dash 8-44CW, Dash 9-44CW
AC4400CW, AC6000CW

Includes for following airhorns:
Wabco E2
Leslie S2M, S3L, S5T, RS3L, RS5T
Nathan K3L, K3LA, K5LA, M3, M5, P3, P5 (Modern), P5A
Holden M3H, K5H

Now you can have the best Digital Sound in those hard-to-fit HO diesels! Tsunami provides waves of pure 16-bit digital sound that will delight your senses; with effects so amazing you won't believe your ears. These Digital Sound Decoders are designed to replace the light board that comes in Atlas HO Diesel engines and many other popular diesel models. Since Tsunami comes with multiple airhorns appropriate to the prototype, no special software or programmer is necessary to achieve the absolute best sound available.
Like the DSD-150 it replaces, Tsunami integrates a full-featured sound system, Hyperlight lighting effects, a motor controller and a DCC decoder into a single, integrated package and is compatible with the NMRA DCC standards and Recommended Practices. Unlike the DSD-150, the Tsunami sound system can also be used on ‘Analog’ layouts and controlled with a conventional power pack, though it really shines on DCC controlled layouts.

At Tsunami’s core is a true 16-bit Digital Signal Processor, or DSP, capable of executing over 120 million instructions per second. With this new level of performance, SoundTraxx was able to give Tsunami 14 functions, over 22 individual sounds, and 4 special effects including the ability to alter the exhaust sound automatically in response to changes in the engine load. The motor controller received numerous enhancements as well, including the use of high frequency PWM and load compensation. To keep the size down, only components available in highly miniaturized packages were selected for use in the Tsunami resulting in a form factor that measures almost 30% shorter and 50% thinner than the DSD-150.

Documentation:

The SoundTraxx Tsunami Digital Sound Decoders are compatible with the NMRA Standards and Recommended Practices.

DECODER FEATURES:

Compatible with the NMRA DCC Standards and Recommended Practices
Supports 7 bit address modes for compatibility with 'simple' systems
Programmable acceleration, deceleration, starting voltage
Supports 14 bit address modes for addressing any Loco number up to 9,999
Supports programming on the main

THROTTLE FEATURES:

Supports 14, 28, and 128 speed step modes
Speed interpolation provides smooth 128 speed step response in any mode
Programmable acceleration, deceleration, starting voltage
7 bit consist addressing
15 pre-programmed speed tables and 1 user programmable speed table
High Frequency Silent Motor Drive
Load Compensation

SOUND FEATURES:

High quality digital sound
Individual, adjustable volume controls
One watt audio amplifier
Polyphonic Sound Processor
16-bit Audio Processing
Playable Horn
7-band Audio Equalizer
Reverb

LIGHTING FEATURES:

15 Lighting effects supporting “Rule 17” or automatic direction control

The Tsunami Digital Sound Decoder is rated for the following loads:

Motor Stall Current: 1 AMP Maximum
Function Current: 100mA (each output)
Audio Amplifier: 1 Watt, 8 ohm load
Track Voltage: 27 Volts Maximum

Tsunami Digital Sound Decoders work with standard 8 ohm speakers available anywhere - no need to buy 'special' speakers!
A DCC Supplies Bass reflex speaker will make your Tsunami sound even more amazing! - Select 8ohm type.

For more information, please visit this products webpage.

This product was added on Monday 16 January, 2012.

Disclaimer Although we have taken care in preparing the information on this page, DCC Supplies Ltd. do not, and cannot guarantee the accuracy thereof. Use of information on this page is at your own risk and by doing so, you shall be deemed to indemnify DCC Supplies Ltd. from any and all injury, damage or loss arising from such use.

Customers who bought this product also purchased

Oval Speaker Small 8 ohm 16mm x 35mm (810113)

Speaker 8 Ohm 14mm x 25mm