6mm Micro-motor with gearbox (25:1) 3v - Electrics & Controls Motors

Product 3 of 11 from Motors

6mm Micro-motor with gearbox (25:1) 3v
[910101010]

£12.14p
(£10.12p excl. VAT)

Scroll down the page for additional related products

Click to enlarge

A Slightly larger 6mm motor!
Just 16mm long, and 6mm in diameter. 0.8mm shaft diameter. (with 3mm plastic bobbin)

Volts
(V) Physical Gear Ratio
(x:1) No Load Peak Efficiency Stall Max Power
(mW)

Diameter
(mm) Length
(mm) Shaft Dia
(mm) Weight
(g) Speed
(rpm) Current
(mA) Speed
(rpm) Current
(mA) Torque
(mNm) Power
(mW) Torque
(mNm) Current
(mA)

3 6 16 3 5 25 1400 45 966 93 0.87 88 2.8 200 103

A geared version of the 6mm motor, this device combines a 6mm coreless motor with a 25:1 planetary gearbox.
Ideal for scale models / general modelling (winches, radars, gun turrets etc.), robotics (BEAM, nano sumo etc.)

This tiny motor is ideal for many applications in various gauges, for example:

Diesel locomotive fan drives
Rotating sign drives
Smoke generator fan assistance
Cranes
Rotating beacons
N & Z scale water wheels and windmills are now practical!

Plus many other uses.

Initially available in 3Vdc, these motors require a low voltage supply (such as the TCS VR1.5)
Speed regulation is then controlled by the C.V. settings of the auxiliary decoder output. As the power requirements of these motors are so low (45mA operating, and 200mA at stall) they can be added to almost anything!
micro motor schematic (6mm diameter x 12mm long x 0.8mm shaft)

This product was added on Saturday 26 January, 2008.

Disclaimer Although we have taken care in preparing the information on this page, DCC Supplies Ltd. do not, and cannot guarantee the accuracy thereof. Use of information on this page is at your own risk and by doing so, you shall be deemed to indemnify DCC Supplies Ltd. from any and all injury, damage or loss arising from such use.

Customers who bought this product also purchased

LED 5mm Warm White (Clear)	Oil Lamp Tinter	Micro connector 4-pin
33m Copper Power bus (5mm)