Massoth DiMax Navigator (Corded)
A large scale specific hand-held cab, with back-lit keypad and display

DiMAX Navigator
This hand held cab (with optional wireless) offers a variety of improved features no other remote control offers. i.e. You control your locomotive whilst sending switching commands at the same time. A full list of features below:

No limits
The DiMAX navigator is optionally available with wireless RC. The wireless system is fully bidirectional and is fail-safe. You may roam freely in or around your layout. You may recharge your batteries by using the bus cable.
The range is approximately 100 ft in buildings and 300 ft outdoors.

Illumination
The DiMAX navigator is one of the few hand held controllers on the market that feature white back-lighting of the display and blue/white keypad illumination. This ensures safe and easy operation in all possible lighting conditions. The background light may be switched off or dimmed to save energy, when operating with the optional wireless. The dial type throttle is also illuminated in various colours depending on the mode of operation. In addition the stop keys are also illuminated if triggered.

Ergonomic design
The housing is ergonomically designed and perfectly balanced in the hand. The symmetric design serves both left and right hand control.

High resolution graphic display
The large liquid crystal display with its white back-light shows the exact operational situation of your locomotives as well as your layout. More than 100 locomotive icons are available. Every locomotive can be displayed with an icon on the screen and you may also name your locomotives individually.
This enables you to easily distinguish between locomotives of the same type. The display also shows the state of the 16 functions of your locomotive, plus light symbol, driving direction and speed both as a numeric value and a graphical bar.

List of feature:

* 10239 locomotive addresses
* 14, 28, and 128 speed steps
* Functions F1 to F16 + light function (as key)
* Locomotive pictures of all commonly used models in G-Scale (all LGB models included)
* locomotive name (alphanumeric)
* parallel and serial data processing
* two operation modes at the same time: 2x locomotive driving mode or 1x locomotive driving mode + 1x switch control mode or switch routes,...
* easy to use control menu
* programmable STOP keys
* 16 x 4-fold consist operation
* 16 switch routes with 15 switches each
* 2048 switch addresses
* 2048 feedback addresses
* 32 automatic functions for driving and switching
* System display ( e.g. current amperage)
* Blocking function (mode with limited functions, e.g. as a child protection)


Programming
The DiMAX Navigator supports all common programming procedures. The programming procedures depends on the DCC system used.
- CV programming ( direct and indirect ) now with MZS III as well
- CV reading
- register programming
- POM Program on Main (program on the main driving track)
- locomotive address programming (direct input of the desired address)

Language selection
The Navigator can display in German, English, French and Netherlands at the moment.
Selection of languages is optional. Assemble your combination language package on your DiMAX Navigator yourself. 2 languages are programmable.
Further languages are installed simply with a software-update, from the Download area on the Massoth website where the latest language-files are available.

DiMAX and MZS III
The DiMAX Navigator is designed to be used with a cable connection or optionally, wireless. It is compatible with the LGB© MTS III system.
If you use the DiMAX Navigator with the LGB© MTS III system the DiMAX Navigator can only perform within the limited capabilities of the LGB© MTS III system.

XpressNet and LocoNet©
The DiMAX Navigator may be used with digital central stations working with the protocol of XpressNet or LocoNet©. For this the wireless DiMAX Multi radio Receiver is required.

Current Firmware
The current firmware version supports the operation of the DiMAX Navigator with DiMAX central stations and the LGB MTS III system. The firmware is available for download in the download section of the Massoth website.