For around £6 per point/signal you can now have full DCC control of your layout's signals and points!

The LS150 turnout decoder is designed for cost effective control for up to 6 independent items.


Specifications include:

* For control of any combination of 6 Atlas, Bachman, Kato, LGB, Peco, Tortoise, or other popular brands of twin-coil snap action or motorised switch machines.

* Support for 1024 accessory decoder addresses. Addresses for each output can be sequential or up to 6 independent addresses can be used.

* High current provision to support Peco and Atlas switch machines with short protection on each output.

* Control using separate push-buttons is possible.

* A pair of diodes (1n4004) are requires for stall/slow action or 2-wire solenoid motor operation. (not supplied)

The pulse duration of the outputs can be set individually from 0.1 seconds to 10 seconds.
This makes it possible to adjust the pulse duration to the needs of the switch machine used.
A pulse of 0.1 seconds is adequate for a normal twin-coil snap action switch machine while a pulse duration of 3-4 seconds is normally needed for a slow motion switch machine.

Configuring the LS150 does not require a separate programming track and the parameters can be changed at any time in the future even after installation.