The new Micro-Decoder from CT Elektronik.
Smaller yet than the DCX74z and is a mere 1.7. thin!

DCX76 dimensions 6.9 x 6.1 x 1.7 mm (LxWxH)
The advantages of the new Micro decoder DCX75 over it's predecessors -

• It's smaller and flatter than the DCX74
• The decoder runs cooler and with higher rail voltages due to the use of a new type of processor
• Improved; optimisable load control
• Drives locos even more slowly and smoothly than before.
• Switchable between 16kHz and 32kHz motor drive frequency
• 4 function outputs,
• Full light effects such as: flashing, dipping the headlights, soft starting, American light effects, clutch mechanism etc. strengthened...
• Reliable overload protection (engine and auxiliary exits are protected from over current)
• Software update without opening the locomotive housing possible (withSoundProg or CAB unit ZF5 from CT electronics)
• 0.8A output, max. 1.6A (3 seconds)
• 4 strengthened output functions totalling 250mA

Plus the usual CT Features:

Supports the complete Zimo signal-dependent train control system and the loco number recognition procedure (without any unintentional "creeping" out of the retaining section).

The 10 the bit processor possessing a Flash MEMORY, thus a software update at any time is economical and possible without processor exchange.
Designed with a scratch pad memory, remembering for 30 (thirty) seconds long without power, The DCX76z therefore guarantees reliable operation with dirty rails. Never again, stopping and re-starting, and without additional components!
Safety device for children: lockable so that one cannot delete or reprogram by mistake.

Full Specification:

• High frequency 16kHz or 32kHz engine control for Faulhaber motors.
• Alternatively steplessly adjustable 30-150 cycles per second for traditional engines.
• 14, 28 or 128 drive steps
• full address area from 1 to 10240 and programming on the main.
• Fully NMRA-COMPATIBLY (DCC data format)
• DCC data format
• Full NMRA "function mapping"
• Function exits separately dimmable
• Dimming frequency 1.2 kHz
• Auto Uncoupler timing for digital clutch
• American light effects
  • flashing
  • dipping the headlights
  • single pulse strobe
  • double pulse strobe
  • Flashing Headlight
  • Ditch Light left
  • Ditch Light on the right
  • Rotary beacon
  • Gyralite
  • Mars Light
  • soft start (slow lighting)
    
• Full address area 1-10240
• 4 strengthened function outputs with a total of 250mA
• 0.8Ampere current
• On the fly ' programming
• Hard RESET for resetting the CV values to factory defaults
• User CV's to personal data store
• Separated adjustable braking time with HLU (also intermediate stages)
• Signal-dependent train control system (HLU Zimo, switchable)
• Track number recognition (Zimo, switch offable)
• Fully-programmable with loc-mice (also values and CVs to 255)
• Reliable overload protection (engine and auxiliary exits are protected from over current)
• 2 CVs groups freely selectable (for own and/or 3rd party applications)