You are using an old version of this browser, for best results please update.
In order to provide you with the best online experience this website uses cookies. By using our website, you agree to our use of cookies. More Info.
MX8m Accessory Decoder module

MX8m Accessory Decoder module

Product Code: 100357
There are currently no reviews listed for this item. If you you would like to submit a review for this item please click 'Write A Review' below and complete the online form.
Out Of Stock
Awaiting
delivery date
£100.00
(£83.33 excl. VAT)

Zimo MX8M Accessory Module
Accessory module for 16 turnouts with twin coil solenoid, 32 uncouplers or signals with a total of 32 light bulbs (or LED's). Group operations possible, e.g. 4 turnouts and 6 signals with 4 bulbs each. The M Module will also operate slow action point motors and servos.

Accessory modules (in contrast to accessory decoders) are controlled via the CAN bus and use the same bus for feedback information. That makes them independent from  track power and are therefore not affected by power outage due to short circuits, can use a different voltage (higher or lower than track voltage) and don't present an extra load either to track current nor data transmission in both directions.

Signals can be operated just as the prototype, with slow illumination/dimming of lights (CV adjustable turn on/off time). Additionally, 14 auxiliary inputs are present on both the MX8S and MX8M, to let trains operate turnouts directly through contact track sections, reed switches etc. (assigned through CV's).

Accessory module for 16 turnouts with twin coil solenoid,  32 uncouplers or signals with a total of 32 light bulbs (or LED's). Group operations possible, e.g. 4 turnouts and 6 signals with 4 bulbs each

MX8S and MX8M will be shipped without a CAN bus cable, because the cable length needed can vary greatly. Don't forget to order a CAN bus cable  in the desired length together with an accessory module or the material necessary to make one yourself (including a divider box if needed)! 

There are currently no reviews listed for this item. If you you would like to submit a review for this item please click 'Write A Review' below and complete the online form. Write A Review
MX8m Accessory Decoder module
Product Code:100357
MX8m Accessory Decoder module

Zimo MX8M Accessory Module
Accessory module for 16 turnouts with twin coil solenoid, 32 uncouplers or signals with a total of 32 light bulbs (or LED's). Group operations possible, e.g. 4 turnouts and 6 signals with 4 bulbs each. The M Module will also operate slow action point motors and servos.

Accessory modules (in contrast to accessory decoders) are controlled via the CAN bus and use the same bus for feedback information. That makes them independent from  track power and are therefore not affected by power outage due to short circuits, can use a different voltage (higher or lower than track voltage) and don't present an extra load either to track current nor data transmission in both directions.

Signals can be operated just as the prototype, with slow illumination/dimming of lights (CV adjustable turn on/off time). Additionally, 14 auxiliary inputs are present on both the MX8S and MX8M, to let trains operate turnouts directly through contact track sections, reed switches etc. (assigned through CV's).

Accessory module for 16 turnouts with twin coil solenoid,  32 uncouplers or signals with a total of 32 light bulbs (or LED's). Group operations possible, e.g. 4 turnouts and 6 signals with 4 bulbs each

MX8S and MX8M will be shipped without a CAN bus cable, because the cable length needed can vary greatly. Don't forget to order a CAN bus cable  in the desired length together with an accessory module or the material necessary to make one yourself (including a divider box if needed)! 

£
(£ excluding VAT)