NCE Power Cab - Starter set
A very simple to use 1.5Amp DCC system.
The best solution for a small layout or anyone starting out with DCC. Extremely easy to setup and most people can be up and running in 10 minutes. Usually 1 or 2 operators and using a fascia-mounted panel for the 2nd operator. Maximum of 4 cabs. The Power Cab must be plugged in to run the layout.
Full featured system with both POM and Programming track capability.
Supplied complete with PCP fascia panel and UK 13.5V PSU
The Power Cab is a complete self contained starter set with 1.5 amp capacity and a DCC track voltage of 12.8 volts. The Power Cab is suitable for Z, N, HO, S, O, and On3 scales. Using the numbers above we can guesstimate that the Power Cab has the capacity for about 4 HO-scale locomotives or 8 N-scale locomotives running at the same time. You do not count locomotives on the track but not running. You can add up to 3 additional NCE cabs of any kind for more operators or locations.
The possibilities for upgrades and expansion after the Power Cab is installed are endless.


