You are using an old version of this browser, for best results please update.
In order to provide you with the best online experience this website uses cookies. By using our website, you agree to our use of cookies. More Info.
Lenz Gold Maxi (10440) 3 Amp DCC Decoder

Lenz Gold Maxi (10440) 3 Amp DCC Decoder

Product Code: 100666
There are currently no reviews listed for this item. If you you would like to submit a review for this item please click 'Write A Review' below and complete the online form.
Out Of Stock
Awaiting
delivery date
£58.16
(£48.47 excl. VAT)
Built to conform to all NMRA Standards and RPs (submitted to NMRA Testing)
Super smooth and silent high frequency back-emf motor control.
Supports NMRA DCC Bidirectional data communication.
USP with optional power module for operation on dirty track.
Asymmetrical DCC support including directional stopping.
SUSI Sound Interface
Adjustable precision stopping control.
Low speed gear for switching operations.
Selectable for operation with 14/27, or 28/128 speed steps.
Operation on conventional DC layouts is possible or can be disabled.
Provides 3 Amp continuous motor current, (10 amp peak.)
Eight function outputs rated at 200mA each with advanced function mapping
Directional or independent lighting with dimming and extensive special effects.
Support for Advanced Consist Control and Extended Addressing.
Support for programming on the mainline (operations mode programming).
Support for all form of programming as described in NMRA RP-9.2.3.

Motor control
The decoder has a high-frequency control (23kHz). To adapt it to the type of locomotive used, you can simply choose between different motor types. These individual motor types include parameter sets which have been specially adapted to the respective models. Moreover, it is also possible to carry out fine-tuning via various CVs.

The minimum, maximum and mid speed can be set; the decoder adapts the characteristic speed line dynamically to ensure a steady, even curve. It is also possible to program an individual characteristic speed curve.

Overload protection
The decoders are protected against overloading, short circuits and overheating.

Starting and braking delay
The starting and braking delays can be set independently of each other. These delays can be enabled and disabled via a function by pressing the key of the digital system once.

Constant braking distance
A special feature of the GOLD decoder provides for a constant braking distance independent of the current speed of the locomotive. This feature is important for model railway operators who install automatic stopping sections in their layouts.

Switching speed
The shunting speed can be set via a function; it halves the speed.

ABC = simple signal stop and slow approach using Asymmetrical DCC

You can carry out a particularly simple signal stop using the ABC braking module. Combined with the constant braking distance, precise on-the-spot stopping in front of red signals is not a problem.

The signal indication "Slow approach/Caution" does not pose a problem; the respective speed can be set via a CV in the decoder.

You can operate all functions during the signal stop or slow approach - you can even reverse away again from the red signal.

Push-pull train control
A push-pull train control can be set if the ABC braking module BM2 is used. There are two different options: push-pull operation with and without intermediate stops. The latter also takes slow-approach sections into account. The stopping time at the end of the track and at the intermediate stops is set at between 1 and 255 seconds via a CV.
USP*
In combination with the optional energy storage, the intelligent USP circuit ensures that your locomotive can run even over dirty track sections or dead frogs. The energy storage is installed separately in the vehicle.

RailCom*
The GOLD decoder is equipped with the RailCom function. In addition to the locomotive address, other data (e.g. speed, CV content) can be transmitted from the locomotive via the track back to the system and displayed.

Function outputs
Eight function outputs can be mapped to the functions of the digital system according to NMRA specifications.

Lighting effects
Different lighting effects can be set at the four function outputs:
Setting the brightness (dimming), can be switched via a function as desired

Ma
There are currently no reviews listed for this item. If you you would like to submit a review for this item please click 'Write A Review' below and complete the online form. Write A Review
Lenz Gold Maxi (10440) 3 Amp DCC Decoder
Product Code:100666
Lenz Gold Maxi (10440) 3 Amp DCC Decoder
Built to conform to all NMRA Standards and RPs (submitted to NMRA Testing)
Super smooth and silent high frequency back-emf motor control.
Supports NMRA DCC Bidirectional data communication.
USP with optional power module for operation on dirty track.
Asymmetrical DCC support including directional stopping.
SUSI Sound Interface
Adjustable precision stopping control.
Low speed gear for switching operations.
Selectable for operation with 14/27, or 28/128 speed steps.
Operation on conventional DC layouts is possible or can be disabled.
Provides 3 Amp continuous motor current, (10 amp peak.)
Eight function outputs rated at 200mA each with advanced function mapping
Directional or independent lighting with dimming and extensive special effects.
Support for Advanced Consist Control and Extended Addressing.
Support for programming on the mainline (operations mode programming).
Support for all form of programming as described in NMRA RP-9.2.3.

Motor control
The decoder has a high-frequency control (23kHz). To adapt it to the type of locomotive used, you can simply choose between different motor types. These individual motor types include parameter sets which have been specially adapted to the respective models. Moreover, it is also possible to carry out fine-tuning via various CVs.

The minimum, maximum and mid speed can be set; the decoder adapts the characteristic speed line dynamically to ensure a steady, even curve. It is also possible to program an individual characteristic speed curve.

Overload protection
The decoders are protected against overloading, short circuits and overheating.

Starting and braking delay
The starting and braking delays can be set independently of each other. These delays can be enabled and disabled via a function by pressing the key of the digital system once.

Constant braking distance
A special feature of the GOLD decoder provides for a constant braking distance independent of the current speed of the locomotive. This feature is important for model railway operators who install automatic stopping sections in their layouts.

Switching speed
The shunting speed can be set via a function; it halves the speed.

ABC = simple signal stop and slow approach using Asymmetrical DCC

You can carry out a particularly simple signal stop using the ABC braking module. Combined with the constant braking distance, precise on-the-spot stopping in front of red signals is not a problem.

The signal indication "Slow approach/Caution" does not pose a problem; the respective speed can be set via a CV in the decoder.

You can operate all functions during the signal stop or slow approach - you can even reverse away again from the red signal.

Push-pull train control
A push-pull train control can be set if the ABC braking module BM2 is used. There are two different options: push-pull operation with and without intermediate stops. The latter also takes slow-approach sections into account. The stopping time at the end of the track and at the intermediate stops is set at between 1 and 255 seconds via a CV.
USP*
In combination with the optional energy storage, the intelligent USP circuit ensures that your locomotive can run even over dirty track sections or dead frogs. The energy storage is installed separately in the vehicle.

RailCom*
The GOLD decoder is equipped with the RailCom function. In addition to the locomotive address, other data (e.g. speed, CV content) can be transmitted from the locomotive via the track back to the system and displayed.

Function outputs
Eight function outputs can be mapped to the functions of the digital system according to NMRA specifications.

Lighting effects
Different lighting effects can be set at the four function outputs:
Setting the brightness (dimming), can be switched via a function as desired

Ma
£
(£ excluding VAT)