You are using an old version of this browser, for best results please update.
In order to provide you with the best online experience this website uses cookies. By using our website, you agree to our use of cookies. More Info.
TCS T1 2 Function Decoder Wires Only 1021

TCS T1 2 Function Decoder Wires Only 1021

Product Code: 100784
4 / 5   3 reviews
87% of reviewers would recommend this product to others.
Out Of Stock
Awaiting
delivery date
£25.50
(£21.25 excl. VAT)

An HO/OO scale decoder with a 9 pin JST socket, and wired only harness.

This decoder can be hardwired, plugged straight into some locomotives, or connected to the 8-pin NMRA sockets using a variety of the available harnesses.

Provides 1.3 amp continuous and 2 amp peak draw.

The T1 features TCS exclusive auto-adjusting BEMF. The T1 is a motor control decoder with two lighting functions (headlight and reverse light)

Dimensions: 24.28mm x 16.63mm x 5.25mm (0.956' x 0.655' x 0.207')

I have fitted this decoder to 16 Farish N gauge loco's, Panniers,Prairies, Halls, Castles , Scratch built King and Great Bear and I believe they are the best value for money and extremely robust and easy to fit. On 4-6-0 etc I put the decoder in the tender connected by 8 pin universal socket. The wires are covered with black shrink tubing and are inconspicuous. more so than on Poole built tender loco's which had a positive lead from the tender to the pole of the motor quite high up.
John -
The T1 decoders are brilliant. Also is the paperwork and on line information. Goodbye Bachmann. I know they are a bit more expensive but my experience so far is that they are far more resilient and they do not loose their configuration. Dcc supplies service is also excellent.
Jeremy -
Tried to fit 1 of these into a p2k gp7 that was dcc ready using the 8 pin TCS plug and harness but I could not get the body back on ther was simply not enough room so I fitted a TCS Board replacement decoder that was much simpler and works fine. I have fitted one of these to a p2k gp20 by hard wiring as the loco was not dcc ready and a board will not fit it works fins but space is still limited. if a loco can accept 1 i would recommend a board replacement.Caution Tried one in an Athern FP59mpi by plugging directly into the 9pin plug (the loco has 9 and 8 pin sockets as standard and is dcc ready), the T1 smoked and melted. Have not plucked up the courage to try another in case that goes the same way the motor is insulated from the frame and I can see no other simple causes, worked fine on dc both before and after.
Robert -
TCS T1 2 Function Decoder Wires Only 1021
Product Code:100784
TCS T1 2 Function Decoder Wires Only 1021

An HO/OO scale decoder with a 9 pin JST socket, and wired only harness.

This decoder can be hardwired, plugged straight into some locomotives, or connected to the 8-pin NMRA sockets using a variety of the available harnesses.

Provides 1.3 amp continuous and 2 amp peak draw.

The T1 features TCS exclusive auto-adjusting BEMF. The T1 is a motor control decoder with two lighting functions (headlight and reverse light)

Dimensions: 24.28mm x 16.63mm x 5.25mm (0.956' x 0.655' x 0.207')

£
(£ excluding VAT)