You are using an old version of this browser, for best results please update.
In order to provide you with the best online experience this website uses cookies. By using our website, you agree to our use of cookies. More Info.
Paint conductive Silver (3g)

Paint conductive Silver (3g)

Product Code: 100899
There are currently no reviews listed for this item. If you you would like to submit a review for this item please click 'Write A Review' below and complete the online form.
3
In Stock
Available for next day delivery, order by 2pm
£15.50
(£12.92 excl. VAT)
Silver loaded Conductive varnish/paint
A thin, smooth, adherent, and flexible conductive paint


Suitable for a wide range of surfaces, including plastics, paper, wood, textiles, glass, ceramics and metals.
It can be applied by brushing, spraying, dipping, or a pencil and will dry atroom temperature.

PRODUCT USE
Shake well before use, (as silver will settle out of suspension)
Bridging from wheel to axle (for pick-ups etc.)
Timing cams
PCB design and repair, repairing heated rear window-screens,
marksensing e.g. on recording tapes, screening plastic housings againsthigh frequency fields,
earthing strips, leading off primary electrons inscanning microscopy,
connections to non-solderable surfaces,electroplating pre-coats, contact surfaces, potentiometer tracks, etc.

FEATURES
* Thin film only required, making SCP economic in use.
* Good electrical conductivity and low surface resistivity.
* Excellent adhesion to wide range of materials.
* Cures at room temperature.

TYPICAL PROPERTIES
Dispersed Solid: Grey Liquid
Carrier: Solvent Blend
Consistency: Creamy
Specific Gravity @ 20C: 1.71
Surface Resistance @ 0.6 to 2 g/100cm2 0.01 to 0.03 Ohms/sq
Electrical Rating: 0.1 to 1 W/cm2
Drying time @ 20C: 10 minutes
Temperature Range: -80C to +125C
Flash Point: -18C
There are currently no reviews listed for this item. If you you would like to submit a review for this item please click 'Write A Review' below and complete the online form. Write A Review
Paint conductive Silver (3g)
Product Code:100899
Paint conductive Silver (3g)
Silver loaded Conductive varnish/paint
A thin, smooth, adherent, and flexible conductive paint


Suitable for a wide range of surfaces, including plastics, paper, wood, textiles, glass, ceramics and metals.
It can be applied by brushing, spraying, dipping, or a pencil and will dry atroom temperature.

PRODUCT USE
Shake well before use, (as silver will settle out of suspension)
Bridging from wheel to axle (for pick-ups etc.)
Timing cams
PCB design and repair, repairing heated rear window-screens,
marksensing e.g. on recording tapes, screening plastic housings againsthigh frequency fields,
earthing strips, leading off primary electrons inscanning microscopy,
connections to non-solderable surfaces,electroplating pre-coats, contact surfaces, potentiometer tracks, etc.

FEATURES
* Thin film only required, making SCP economic in use.
* Good electrical conductivity and low surface resistivity.
* Excellent adhesion to wide range of materials.
* Cures at room temperature.

TYPICAL PROPERTIES
Dispersed Solid: Grey Liquid
Carrier: Solvent Blend
Consistency: Creamy
Specific Gravity @ 20C: 1.71
Surface Resistance @ 0.6 to 2 g/100cm2 0.01 to 0.03 Ohms/sq
Electrical Rating: 0.1 to 1 W/cm2
Drying time @ 20C: 10 minutes
Temperature Range: -80C to +125C
Flash Point: -18C
£
(£ excluding VAT)