You are using an old version of this browser, for best results please update.
In order to provide you with the best online experience this website uses cookies. By using our website, you agree to our use of cookies. More Info.
Lenz Standard PLUS decoder 10231-01

Lenz Standard PLUS decoder 10231-01

Product Code: 101315
There are currently no reviews listed for this item. If you you would like to submit a review for this item please click 'Write A Review' below and complete the online form.
Out Of Stock
Awaiting
delivery date
£20.25
(£16.88 excl. VAT)
The Lenz Standard has been upgraded with Railcom!
A back EMF, 3 function, 1 amp, output protected decoder, with an 8 pin plug and Railcom.


The decoder has a high-frequency control (23kHz). You can choose between six different motor types in CV50.
The decoder has a so-called EMF switch which makes it possible to adjust the decoder to different motor types.
The decoder can be operated in the 14/27 or the 28/128 running-notches mode.
Function 4 disables any set start or stop delay.
Constant braking distance (not ABC) Making a change from one running notch to running notch 0 (e.g. by moving the turning-knob of the manual control to the left limit-stop), the locomotive/train covers a set distance before stopping.
Shunting speed function 3 (If the shunting speed is enabled, the constant braking distance is disabled.)
Function mapping of all 3 functions.
Lighting effects

Technical Data
Bi-Directional communication: Railcom
Maximum current-carrying capacity 1.0 A
Motor output Continuous 1,0 A
Function output A, B and C 100 mA
Locomotive addresses 1 - 9999
Running notches 14, 27, 28, 128
Dimensions 25,0 x 15,4 x 3,5 mm

There are currently no reviews listed for this item. If you you would like to submit a review for this item please click 'Write A Review' below and complete the online form. Write A Review
Lenz Standard PLUS decoder 10231-01
Product Code:101315
Lenz Standard PLUS decoder 10231-01
The Lenz Standard has been upgraded with Railcom!
A back EMF, 3 function, 1 amp, output protected decoder, with an 8 pin plug and Railcom.


The decoder has a high-frequency control (23kHz). You can choose between six different motor types in CV50.
The decoder has a so-called EMF switch which makes it possible to adjust the decoder to different motor types.
The decoder can be operated in the 14/27 or the 28/128 running-notches mode.
Function 4 disables any set start or stop delay.
Constant braking distance (not ABC) Making a change from one running notch to running notch 0 (e.g. by moving the turning-knob of the manual control to the left limit-stop), the locomotive/train covers a set distance before stopping.
Shunting speed function 3 (If the shunting speed is enabled, the constant braking distance is disabled.)
Function mapping of all 3 functions.
Lighting effects

Technical Data
Bi-Directional communication: Railcom
Maximum current-carrying capacity 1.0 A
Motor output Continuous 1,0 A
Function output A, B and C 100 mA
Locomotive addresses 1 - 9999
Running notches 14, 27, 28, 128
Dimensions 25,0 x 15,4 x 3,5 mm

£
(£ excluding VAT)