827112 Tsunami TSU-1000 Baldwin
827112 Soundtraxx Tsunami TSU-1000 Baldwin 608-NA
Product Code: 102077
BaldwinDiesel Tsunami in Soundtraxx TSU-1000 version.
This version is the for prototypes manufactured with the Baldwin 608NA Diesel Engine Prime Mover.
This includes such locomotives as:
DS-4-4-1000
DT-6-6-2000
DR 6-4-2000
Small switchers.
Airhorns included are:
Wabco A2, E2
Leslie A125, A200, S2M, S3L, S5T
Nathan K3L,M3, M5, P3, P5 (Early)
Holden M3H, K5H
Hancock 4700 Air Whistle
Categorised by the prime mover that was in the original manufactured locomotive and containing up to 16 airhorns in each
The Diesel User's Guide Link: [Tsunami Diesel Users Guide]will get you started; other product documentation will be updated shortly.
The Tsunami sound system is SoundTraxx’s high-performance, onboard locomotive sound system. Like the DSD-150 it replaces, Tsunami integrates a full-featured sound system, Hyperlight lighting effects, a motor controller and a DCC decoder into a single, integrated package and is compatible with the NMRA DCC standards and Recommended Practices. Unlike the DSD-150, the Tsunami sound system can also be used on ‘Analog’ layouts and controlled with a conventional power pack, though it really shines on DCC controlled layouts.
At Tsunami’s core is a true 16-bit Digital Signal Processor, or DSP, capable of executing over 120 million instructions per second. With this new level of performance, SoundTraxx was able to give Tsunami 14 functions, over 22 individual sounds, and 4 special effects including the ability to alter the exhaust sound automatically in response to changes in the engine load. The motor controller received numerous enhancements as well, including the use of high frequency PWM and load compensation. To keep the size down, only components available in highly miniaturized packages were selected for use in the Tsunami resulting in a form factor that measures almost 30% shorter and 50% thinner than the DSD-150.
This version is the for prototypes manufactured with the Baldwin 608NA Diesel Engine Prime Mover.
This includes such locomotives as:
DS-4-4-1000
DT-6-6-2000
DR 6-4-2000
Small switchers.
Airhorns included are:
Wabco A2, E2
Leslie A125, A200, S2M, S3L, S5T
Nathan K3L,M3, M5, P3, P5 (Early)
Holden M3H, K5H
Hancock 4700 Air Whistle
Categorised by the prime mover that was in the original manufactured locomotive and containing up to 16 airhorns in each
The Diesel User's Guide Link: [Tsunami Diesel Users Guide]will get you started; other product documentation will be updated shortly.
At Tsunami’s core is a true 16-bit Digital Signal Processor, or DSP, capable of executing over 120 million instructions per second. With this new level of performance, SoundTraxx was able to give Tsunami 14 functions, over 22 individual sounds, and 4 special effects including the ability to alter the exhaust sound automatically in response to changes in the engine load. The motor controller received numerous enhancements as well, including the use of high frequency PWM and load compensation. To keep the size down, only components available in highly miniaturized packages were selected for use in the Tsunami resulting in a form factor that measures almost 30% shorter and 50% thinner than the DSD-150.
Documentation:
- Tsunami Diesel Users Guide
- Tsunami Quick Start Guide
- Tsunami Installation Guide
- Tsunami Steam Sound Users Guide
- Tsunami Technical Reference
The SoundTraxx Tsunami Digital Sound Decoders are compatible with the NMRA Standards and Recommended Practices.
DECODER FEATURES:
-
Compatible with the NMRA DCC Standards and Recommended Practices Supports 7 bit address modes for compatibility with 'simple' systems
-
Programmable acceleration, deceleration, starting v
There are currently no reviews listed for this item. If you you would like to submit a review for this item please click 'Write A Review' below and complete the online form. Write A Review
Currently Out Of Stock
