You are using an old version of this browser, for best results please update.
In order to provide you with the best online experience this website uses cookies. By using our website, you agree to our use of cookies. More Info.
Lenz LA010 Two wire point motor adapter 11010

Lenz LA010 Two wire point motor adapter 11010

Product Code: 102807
5 / 5   1 review
100% of reviewers would recommend this product to others.
5
In Stock
Available for next day delivery, order by 2pm
£10.40
(£8.67 excl. VAT)
Use with slow action point motors, or to operate crossing gates etc.

On one end of the motor output adapter are 3 pins for connecting to the accessory decoder. which fit into the existing screw terminals on the accessory decoder. This makes installation very simple.

  • On the other end you find 2 screw terminals to connect the turnout motor drive.
  • The maximum load of LA010 is 0.75 A in continuous use; the brief peak load is 3.0 A (maximum 1 sec.).

In the following wiring schematics, the turnout motor drive is shown as a motor symbol. We recommend that the output pulse of the output used is set to a suitable pulse duration (see the accessory decoder manual for instructions).

The motor drive you use may have built-in motor power disconnection at each end of movement. You can leave these as they are.

LenzLA
Before I couldnt go to dcc with this system l successfully de the dcc woks
Martin - Wakefield
Lenz LA010 Two wire point motor adapter 11010
Product Code:102807
Lenz LA010 Two wire point motor adapter 11010
Use with slow action point motors, or to operate crossing gates etc.

On one end of the motor output adapter are 3 pins for connecting to the accessory decoder. which fit into the existing screw terminals on the accessory decoder. This makes installation very simple.

  • On the other end you find 2 screw terminals to connect the turnout motor drive.
  • The maximum load of LA010 is 0.75 A in continuous use; the brief peak load is 3.0 A (maximum 1 sec.).

In the following wiring schematics, the turnout motor drive is shown as a motor symbol. We recommend that the output pulse of the output used is set to a suitable pulse duration (see the accessory decoder manual for instructions).

The motor drive you use may have built-in motor power disconnection at each end of movement. You can leave these as they are.

£
(£ excluding VAT)